{"id":4643,"date":"2014-05-31T14:23:54","date_gmt":"2014-05-31T21:23:54","guid":{"rendered":"https:\/\/vtbs.com\/dev\/?p=4643"},"modified":"2015-07-11T10:28:09","modified_gmt":"2015-07-11T17:28:09","slug":"9920-9922-jefferson-3","status":"publish","type":"post","link":"https:\/\/vtbs.com\/dev\/9920-9922-jefferson-3\/","title":{"rendered":"9920-9922 Jefferson"},"content":{"rendered":"
\n

9920-9922 JEFFERSON<\/h1>\n
Culver City, CA<\/address>\n

Client:<\/h3>\n

Abraxis Bioscience, LLC \u00a0<\/strong><\/p>\n

Area:<\/h3>\n

Building 1 (existing): 55,509 sf\u00a0<\/strong>
\nBuilding 2 (new): 17,000 sf\u00a0<\/strong><\/p>\n

Total Lease Space:<\/h3>\n

72,509 sf<\/strong><\/p>\n

Storage\/Warehouse:<\/h3>\n

8,250 sf<\/strong><\/p>\n

Total Project Area:<\/h3>\n

80,759 sf<\/strong><\/p>\n

Parking:<\/h3>\n

Handicap – 8 stalls<\/strong>
\nStandard – 61 stalls<\/strong>
\nCompact – 144 stalls<\/strong><\/p>\n

Status:<\/h3>\n

Construction Documents<\/strong><\/p>\n

9920 Jefferson will provide Culver City, CA with much-needed \u2018creative office space.\u2019\u00a0 Dating from 1962, this steel-framed, reinforced masonry manufacturing building is being renovated and designed for re-use as professional and\/or scientific offices.\u00a0 VTBS is providing Architectural Services to include the design for upgrades, alterations and improvements to the existing building, one element of which, will involve removing areas of the second floor framing to allow a natural light atrium at the first floor level.<\/p>\n

Taking advantage of the balance of the existing lot, VTBS has conceived a radiant new office building, designed to complement the existing structure yet vitalize the project with a modern image. The new building will be four stories in height with a usable roof terrace and constructed with a cast-in-place concrete first floor with three steel frame floors above.<\/p>\n

Abraxis Bio Science plans to develop a new, approximately 25,250 sf Office Building, located behind but on the same site as their existing manufacturing building in Culver City, CA.\u00a0 The new building will be four stories in height with usable roof terrace and constructed with a cast-in-place concrete first floor with three steel frame floors above.<\/p>\n

Building One:<\/h2>\n

Existing reinforced masonry structure to remain.\u00a0 Remove and replace existing windows, install new mechanical, electrical and plumbing systems to the structure as required.\u00a0 Replace roofing and add skylights.\u00a0 Remove areas of the second floor framing to allow natural light into the first floor below.\u00a0 (remove 2,001 sf of existing floor area) Replace and add landscaping to the site.<\/p>\n

Building Two:<\/h2>\n

The addition of a new three-story, 17,000 sf (14,999 sf of new floor area and 2,001 sf of existing area removed from the building) steel framed structure over a new 8,250 sf (existing floor area from parking area) one-story concrete structure.<\/p><\/blockquote>\n